| Submitter | Florian Fainelli |
|---|---|
| Date | 2010-03-01 10:03:27 |
| Message ID | <201003012336.28071.florian@openwrt.org> |
| Download | mbox | patch |
| Permalink | /patch/1015/ |
| State | Accepted |
| Delegated to: | Ralf Baechle |
| Headers | show |
Comments
Hello. Florian Fainelli wrote: > The DWVS0 board is a BCM6358-based board with an on-board OHCI controler. > > Signed-off-by: Florian Fainelli <florian@openwrt.org> > --- > diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c > index 0b1d60f..8bf2c01 100644 > --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c > +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c > @@ -567,6 +567,27 @@ static struct board_info __initdata board_AGPFS0 = { > .has_ohci0 = 1, > .has_ehci0 = 1, > }; > + > +static struct board_info __initdata board_DWVS0 = { > + .name = "DWV-S0", > + .expected_cpu_id = 0x6358, > + > + .has_enet0 = 1, > + .has_enet1 = 1, > + .has_pci = 1, > + > + .enet0 = { > + .has_phy = 1, > + .use_internal_phy = 1, > + }, > + > + .enet1 = { > + .force_speed_100 = 1, > + .force_duplex_full = 1, > + }, > + > + .has_ohci0 = 1, > Why it's not aligned with the rest of initializers? WBR, Sergei
Applied, thanks. Ralf
Patch
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 0b1d60f..8bf2c01 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -567,6 +567,27 @@ static struct board_info __initdata board_AGPFS0 = { .has_ohci0 = 1, .has_ehci0 = 1, }; + +static struct board_info __initdata board_DWVS0 = { + .name = "DWV-S0", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, +}; #endif /* @@ -595,6 +616,7 @@ static const struct board_info __initdata *bcm963xx_boards[] = { &board_96358vw, &board_96358vw2, &board_AGPFS0, + &board_DWVS0, #endif };
The DWVS0 board is a BCM6358-based board with an on-board OHCI controler. Signed-off-by: Florian Fainelli <florian@openwrt.org> ---